Vision Systems for Labeling
In the production line, the product must be inspected before delivery to the customer. For the accuracy of the production, we have to have staff to check the label on the product that is right.
Vision system for checking the position of the label of cosmetic products.
In the production line of Thai cosmetics industry, it is necessary to check the packaging of the products before delivery to customers. So now employees checking the position of the sticker label on the dough that is in the center of the cartridge.
Vision system for detecting dirt and stains inside paper cups
Overall system specification uses the camera to verify the integrity of the paper cup. Including impurities caused by oil stains. Or dirt that may fall into the cup during production. So we used a vision system to automatically detect the dirt, the size of the dirt that can be detected is from 0.5 mm upwards on 100 mm inspection area.
Vision system for position detection of PCB devices.
System's overall specification uses the camera to check the position of the device on the PCB before the device is soldered. We used a vision system to check the PCB area to put the device properly. Using visual Match pattern techniques to compare between master image and real-time images automatically. The size of the PCB that can detect the position of the device is the size from 20 millimeters up to 300 millimeters.
FPC Position Detection System
The overall system specification will be used with the automatic machine to locate the equipment on the FPC, as well as to establish a reference point for the automatic machine. To improve the accuracy of the device is the most accurate.
Vision system works with Scara Robot
The overall details of the system will be used together with a 4-axis camera to give the camera an eye for the robot to place the bar code on the PCB in each position correctly. So the edges of the bar code are parallel to the edges of the PCB, Using a technique to create reference points by aligning the axis of the camera to the axis of the camera. And create an original point then send the placement point to the robot to place the bar code in the correct position.
Vision System for automotive assembly part
In the production line of the engine industry, it is necessary to check the assembly of the engine. Even the label of the product hundred percent before delivery to customers, present we have used industrial camera technology to help staff to check the assembly of the spare parts or labeling Logo of the product correctly.
Vision System for PCB Assembly
The system's overall specification uses high resolution cameras for automatic detection, This will check all the devices on the PCB that the device is in position is correct. If the program detects that there is no device, it will send the signal to the previous work machine and stop working and send a warning to the staff and fix it.
Vision system with PLC control IAI robot
The overall system uses the camera to automatically locate the markers in the area will scan the position in the x-axis and the y-axis of the image, and then send the current position X and Y to the PLC to instruct the robot to run the marker at that location properly.
Adapt these three columns to fit you design need. To duplicate, delete or move columns, select the column and use the top icons to perform your action.
To add a fourth column, reduce the size of these three columns using the right icon of each block. Then, duplicate one of the column to create a new one as a copy.
Delete the above image or replace it with a picture that illustrates your message. Click on the picture to change it's rounded corner style.